Ping: Something is not right with your network.
I would recommend giving your devices more unique names. After that, as long as it is online you should be able to connect to it remotely. You only have to set up the device in eCatcher and run the Wizard one time. Here are some videos that explain setting up remote access: M2Web will only work for certain protocols, like HTTP, VNC, etc. You will need to use eCatcher (software) for remote access to the PLC. It’s very important that you follow these directions. You can try checking the “disable tags in error” in IO settings and checking the Event Logs for errors and share that. Most likely there is something wrong with the tags or their addresses. You can use and leave the credentials blank. You can create tags associated with the FLX3402 card inputs and outputs (using the eWon IO Server) and use those in your BASIC scripts.
#SIEMENS SIMATIC S7 1200 MODEM INSTALL#
I apologize for the doubts but it was important for me to try to solve this as I will install similar equipment in a company. This is normal? Shouldn’t he record the call or equipment created in eCatcher? Ī red circle appears above the tag that says “No communication.”Ĭan you help me please? What will be the problems?Ĥ - How do I remotely access the PLC S7-1200? How do I use M2M? At this moment I am connected to the WAN network through the letter FLB3271.ĥ - When the equipment is turned off, I always have after communicating with ethernet cable in Flexy 205 and setting up new device in eCatcher.
How can I do it? The configuration I have is this:ģ - I can not communicate with PLC S7-1200 even following the following configuration.
#SIEMENS SIMATIC S7 1200 MODEM CODE#
I have some points that I needed your help with some urgency.ġ - How do I program code by making logic with the digital and analog inputs and outputs and as a result activate the Flexy 205 or FLX3402 card outputs?Ģ - I can’t send SMS via eWON Flexy 205. I can already work with the digital inputs and outputs.
0 kommentar(er)
